Injection Mould for Pails

- Material : High Density Polyethylene
- Nominal Capacity : 5.0 Gallons (18.9 Liters)
- Wall Thickness : 90 mil
- Tare Weight : 2.1 lb (pail w/handle)
- Exterior Height : 14 1/2"
- Top Internal Diameter : 11 3/8"
- Bottom External Diameter : 10 1/4"
- Shipping Carton : 20 units
- Tray : 120 units
- Truckload : 5,400 (may vary)
- Covers : 40CP, 40CT, 40CL, 40C, 40CH, 40CG, 40CR
- Gaskets : Tubular rubber available for 40C, 40CT, 40CR, and 40CL. Flowed-in available for 40CG and 40CG
- Handle : 9 gauge wire
- Fittings : Available with some covers
- Fill Temperature : 180 Degree maximum
- Offset Printing : 8 ?" high by 33" maximum printing length measure is 17". Pail Circumference at center of print area is 33 7/8".
- Nesting : Tapered sidewalls for easy nesting.
- Stacking : With materials not exceeding a density of 8.4 pounds per gallon, recommended maximum stacking is 3 pails high per pallet, 2 pallets high.
- Color : White is standard. Custom colors available on minimum orders.
- UN Packages : Solid Packages - 40BP w/40CP, 40CT, 40CR covers. Refer to UN Container Guide.

• Target Unit Price:
• Neg.