x
Welcome to Tradeeasy
Enjoy our FREE buyer tools & services
  1. Procurement Meeting
  2. Post Sourcing Request
  3. Post Trade Alert
  4. Hot Products

Be Our Member to source Radio Transceiver!

Register Now

Featured Radio Transceiver Manufacturers/Suppliers

Hong Kong Manufacturer
The closest focusing distance up to 0.25 meter, when under close-up shooting, it is available to get the unique sense of depth of the wide-angle lens. *F2 large aperture, virtual background, which makes photography with more fun; *Support auto focus (AF) and manual focus (MF) mode; *The aperture blades up to 7 pieces, which allows you able to shoot the near-circular diffuse plaques, appropriately narrow the apertures can shoot the 14 astral effect; *Adopts chrome high precision metal bayonet, which effectively improve the goodness to fit the camera body and the bayonet strength, wear and corrosion resistance for durable use; *Full line of the products are glass lenses; *Supports full-frame and APS-C format cameras, supports M/AV/TV/P and other camera shooting modes and can be displayed the aperture data in the EXIF Information; *Multi-coated lenses, effectively improve the transmittance and suppress the ghosting and flare when in backlit shooting; *Adopts gold plating for the metal contacts, effectively improve the signal conductivity and corrosion resistance., E-TTL Wireless Flash Receiver YNE3-RX YNE3-RX Ÿ Supports flash mode: E TTL, M, MULTI Ÿ Supports remote shutter release function, test flash Ÿ Supports PC output interface Ÿ Supports USB firmware upgrade Ÿ Supports single contact triggering Ÿ Supports single contact flash triggering Ÿ LCD Display The compatible transmitter (master unit) : YN-E3-RT/YN600EX-RT/ST-E3-RT/600EX-RT Parts of the compatible E-TTL flash list: Canon 600EX( RT) /580EXI I /430EXI I Yongnuo YN568EX(II)/ YN565C/YN468C(II) /YN467C(II) /YN465C, Specification: This High Quality Flashgun Adapter Mount C is different from Mount B, the image and struction is changed, it's lighter and smaller.The main point for this Mount C is the head can be round at 360 degree, you can use it at any point of view, it's very convenient to use.It can be attached to your light stand, insert your flash unit and umbrella so it is at an optimum angle for getting great photographic results time after time. The hot shoe for this Mount C is made of plastic, it can prevent to scratching the flashlight and ballhead.When you remove the plastic hot shoe, there is a screw mount, you can mount CTR-301 P or any other product with screw hole, it's very easy, efficient, high quality product. Note: It can fits for most standard flash unites.But it needs an additional adapter to for Sony and Minilta Flash., *F1.8 large aperture, virtual background, which makes photography with more fun *Supports auto-focus and manual focus mode *Adapts gold plating for the metal contacts, effectively improve the signal conductivity and corrosion resistance *Supports M/AV/TV/P and other camera shooting modes and can be displayed the aperture data in the EXIF information *Supports full-frame and APS-C format cameras *Multi-coated lenses, effectively improve the transmittance *Adapts high-quality plastic as external structure, the overall weight is only 120g, which is convenient for outdoor shooting, Supports RT system: One YN600EX-RT can be used as on-camera master unit and remote slave unit of Canon’s RT system and supports Gr grouping mode Fully compatible with YONGNUO YN-E3-RT, Canon’s 600EX-RT/ST-E3-RT wireless signal: *One YN600EX-RT can be used as master unit to trigger YONGNUO YN600EX-RT, Canon’s 600EX-RT and live display the flash groupings of slave unit and recycling information *One YN600EX-RT can respectively receive the wireless signal of master unit YN600EX-RT, YN-E3-RT, Canon’s 600EX-RT/ST-E3-RT, realizing remote TTL, M and Gr flash High guide number, supports high-speed sync: *GN60@ISO10, 200mm *Supports high-speed sync TTL, manual flash, Gr grouping flash, the highest synchronous speed can reach 1/8000s Supports USB firmware upgrade: The YN600EX-RT equipped with the USB interface, supports firmware upgrade, the users can download the upgrade firmware through the Yongnuo official website to upgrade the flash Supports wireless optical slave function: The YN600EX-RT supports YONGNUO, Canon’s and Nikon’s wireless optical master signal, supports S1 and S2 pre flash cancel mode Supports auto/manual zooming: The YN600EX-RT supports auto and manual zooming, the flash coverage can be changed between AUTO, 20-200mm Settings save automatically, supports custom settings (Fn): The parameters on the flash will automatically save when the flash turned off; the users can customize setting the flash function as needed Ultrafast charging recycle system, supports external power supply Equipped with big size LCD display screen, standard PC synchronous interface, Supports wireless master function: The YN560 IV can be used as master unit, provides 3 independent groups with controlling ability, realizing remote control the flash mode, flash output and focal length of the YN560 IV and YN560 III. Supports wireless slave function, fully supports YN560-T, RF-603(I/II), RF-602 wireless transmitter: *One YN560 IV can respectively receive the wireless signal from YN560 IV, YN560-TX, RF-603 (I/II), RF-602, with optional 16 channels *When the YN560 IV and YN560-TX used as transmitter, it can realize remote control the parameter settings Multiple trigger synchronous mode supported: The YN560 IV can triggered through the set top of the camera, 2.4G wireless triggering, S1 and S2 pre flash cancel mode Settings save automatically, supports custom settings (Fn): The parameters on the flash will automatically save when the flash turned off; the users can customize setting the flash function as needed GN58 @ ISO100, 105mm: High guide number 2.4G wireless speedlite, supports M/Multi/-mode Sound prompting system: When the sound prompting system is enabled, the different sound ways will prompt different operating state of the flash so as to allow you focus on shooting Support electric zooming function: The flash coverage can be altered between 24-105mm through the (ZOOM) button Ultrafast charging recycle system, supports external power supply Equipped with big size LCD display screen, standard PC synchronous interface, 1.Formed by 300 lamp beads with 3200k color temperature and another 300 lamp beads with 5500k color temperature, the lamp beads of extra-large luminous chips; the color temperature can be adjusted from 3200-5500k. 2.Adopts the latest LED driving technology, definitely not appear the corrugated,stroboscopic and other negative phenomena when shooting. 3.Adopts the encoder digital dimming which can be separately adjusted to rough 4.Adopts digital display screent. 5.Supports external direct-current power input (the power adapter is for option). 6.Adopts intelligent fan heat dissipation. 7.The infrared remote controller is configured, thus the brightness and power switch can be adjusted away from the machine,meanwhile three sets of camera lights can be respectively control the brightness and switch. 8.Two color temperature plates are configured. Specifications: Light Source: 600 LED beads Luminance Angle: 55° Color Temperature of the 5500k Video Light: 5500k Color Rendering Index: >90% Remote Control Distance: less than 8m Power: 36W Weight: 1260g Lumen: 4680LM Size:260*188*40 Average Service Life: 50000H Power Source: Two lithium batteries or external 8V and 5A direct current power supply, Specificarion: Master Mode Support HSS, the High Speed Sync, up to 1/8000 second Wireless TTL Slave for Canon and Nikon Hot shoe TTL for Canon Guide Number 58 (ISO 100, 105mm) Flash Modes: ETTL / i-TTL, M, Multi Mode Modeling Light Auto and Manual Zooming Head 24 °C 105mm Auto Zoom for Sensor Size 2.5mm Sync Port 3 Seconds Recycle TimeCons1.Supports Hight-Speed Sync Flash Features: 1.With high-speed sync (FP flash), the YN568EX II can synchronize with all shutter speeds, the maximum shutter sync up to 1/8000. 2.Master flash. This YN-568EX II can be used as a Master flash to trigger YONGNUO flashes YN568EX II, YN568EX, YN565EX, YN500EX, YN560EX, YN510EX, and Canon flashes 600EX-TR, 580EX II, 580EX, 430EX II. 3.Supports for Canon's and Nikon's System It can work as a remote slave flash tiggered by Canon 600EX-RT, 580EX II, Nikon SB-910, SB-900, SB-800, SB-700, Canon 5DIII, 7D, 60D, 700D, 650D, 600D, Canon c-commander ST-E2, Nikon SU-800, achieves wireless TTL and manual flashing. 4.TTL Flash With Large Guide Number GN58@ ISO100, 105mm; which reaches the level of the mainstream hot shoe flashes, supports HSS, TTL/M/Multi mode. 5.Multiple Trigger More Supported The YN568EX II can be triggered by hot shoe, flash command slave mode, optical S1 and S2 (pre-flash-canceled mode). 6.Supports Auto/Manual Zooming 7.Comprehensively Support TTL Functions 8.2.5mm PC Synchronous Interface 9.Sound Prompting System 10.Modeling Light Function 11.Advanced Settings On Flash 12.Automatic Setting Saving 13.LCD Panel User Interface With Super Gelivable Metal Hot-Shoe Stand, Specification: The YN-622N-TX transmitter acts as a master control unit to the popular YN-622N ITTL and Remote Manual transceivers, providing more functions and a far more user friendly built-in LCD user interface. Also adding a USB port for firmware updates, which is major advantage over the current triggers. The improved YN-622N-TX also enhances stability, as well as improving information transmission speeds. Note: You should use it with Yongnuo Flash Trigger YN-622 N tranceivers together. Features: 1, 3 Groups ( A/B/C) 2, Mix TTL, Remote Manual, and SuperSync Groups 3, Syne mode ( front-curtain syne, rear-curtain sync, Hi-speed sync ( Auto FP ) ) 4, Max Sync. Speed: 1/8000s 5, Trigger Interface: Hot shoe, PC 6, Individual 1/3rd stop Manual Power and FEC adjustment 7, Remote Flash Zoom in 3 groups, and Auto Zoom 8, 2nd Curtain Sync, HSS, SuperSync 9, USB port for Firmware Updates 10, AF Assist Light 11, Remote Shutter Release Function 12, Dedicated Buttons for Fast Adjustments 13, Battery Level Indicator 14, 2.5mm shutter release interface ( We have two cables, one is for N1, other is for N3 ) 15, PC Interface ( You can buy RF-602 PC/PC to connect it with your camera ) 16, 7 Channels 17, Improved Stability and Transmission Speed 18, SuperSync Manual Timing Adjustment by Group 19, Flash Value Lock function (FVL) 20, Modeling Flash & Red-Eye Reduction flash 21, Settings Saved Automatically 22, Up To 100M Range, Specification: This item YN-E3-RT Speedlite Transmitter is directly compatible with the Canon 600EX-RT flash, and a coming YongNuo YN-600EX-RT flash unit. It includes all the features of the Canon ST-E3-RT, as well as extra features including - AF Focus Assist light - USB port for firmware updates - Second curtain sync (in manual only) - Full GR Group Mode functionality has also now been added for pre 2012 model cameras - Slave flash charge status does not stop other flashes from firing YN-E3-RT features: -Flash Mode: ETTL/M/Multi/GR 4 flash modes -A/B/C/D/E 5 groups -Supports 1st Curtain, 2nd Curtain (Only in M mode), High speed Sync -Supports ETTL Ratio, Flash Exposure Compensation,Flash Exposure Lock, Flash Exposure Bracket, Modeling Flash -9 Custom Functions -Settings saved automatically -Dust and water resistance equivalent to EOS-1D series cameras -Two-way 2.4G radio communication, fully compatible with Canon ST-E3-RT/600EX-RT -Control up to 5 groups (15 units) of Speedlites -15 Physical Channels, 1 Auto Channel, Up to 10,000 customizable photographer ID -Transmission Range: 100M -Multi YN-E3-RT can share slave flashes -Display group/charge status of slave flashes -Firmware can be upgraded via USB ( You need to buy extra USB Cable ) -High resolution Dot-Matrix LCD, Backlight for LCD/keys -Fast lock mechanism -Built-in AF assist beam emitter, buzzer -Remote shutter release, Linked Shot ( (Need extra shutter cable for cameras released before 2012) Suit for: ALL Canon DSLR Camera with E-TTL II / E-TTL autoflash Canon 600EX-RT Canon ST-E3-RT Yongnuo YN-600EX-RT Package Includes: 1 x YN-E3-RT 2 x Shutter release cable for Canon camera 1 x Manual in English and Chinese 1 x Protect bag 1 x Original box, *Supports RT System One YN600EX-RT can be used as on-camera master unit and remote slave unit of Canon’s RT system,and supports Gr grouping mode. *Fully Compatible with YONGNUO YN-E3-RT,Canon’s 600EX-RT/ST-E3-RT Wireless Signal One YN600EX-RT can be used as master unit to trigger YONGNUO YN600EX-RT,Canon’s 600EX-RT,and live display the flash groupings of slave unit and recycling information; One YN600EX-RT can ]respectively receive the wireless signal of master unit YN600EX-RT、YN-E3-RT、Canon’s 600EX-RT/ST-E3-RT, realizing remote TTL、M and Gr flash. *High Guide Number, Supports High-speed Sync GN60@ISO100,200mm;supports high-speed sync TTL, manual flash, Gr grouping flash, the highest synchronous speed can reach 1/8000s *Supports USB Firmware Upgrade The YN600EX-RT equipped with the USB interface, supports firmware upgrade, the users can download the upgrade firmware through the Yongnuo official website to upgrade the flash. *Supports Wireless Optical Slave function The YN600EX-RT supports YONGNUO, Canon’s and Nikon’s wireless optical master signal, supports S1 and S2 pre flash cancel mode. *Support Auto/Manual Zooming The YN600EX-RT supports auto and manual zooming, the flash coverage can be changed between AUTO, 20~200mm. *Settings Save Automatically, Supports Custom Settings (Fn) The parameters on the flash will automatically save when the flash turned off; the users can customize setting the flash function as needed. *Ultrafast Charging Recycle System, Supports External Power Supply *Equipped with Big Size LCD Display Screen, Standard PC Synchronous Interface, Major Specifications Mount:EF mount(Electronically controlled) Lens construction: 9elements in 5 groups Dimensions(max.dia. ×length): 55×73.9mm Weight:approx.342g Safety Precautions 1.Do not stare at the sun or a bright light source through the lens with the Extender attached,or with a camera with the Extender and lens attached.Doing so could result in visual impairment.In particular,do not look at the sun directly through the lens with the Extender attached,otherwise it could result in loss of vision. 2.Do not leave the lens with the Extender attached,or a camera with the Extender and lens attached in the sun without the lens cap on.Otherwise it may result in concentrating the sun’s rays ,causing a fire. 3.Do not leave the Extender in excessive heat places, such as in a car with direct sunlight.High temperatures can cause the Extender to malfunction. Using an Extender with this lens may result in incorrect autofocus. If your camera has an AF microadjustment function,do the AFmicroadjustment. If your camera does not have an AF microadjustment function,focusmanually if the AF precision is way off. If the automatic focusing does not smooth,it is because the lens aperture is too small and zoom out two stop of the aperture to decrease half of the into light.At that time please focus manually if the AF is not smooth Mounting and dismounting the Extender First attach the Extender to the lens,then attach it to the camera.Please follow the opposite procedures to disassemble. To detach the Extender from the lens,push the lens release lever as shown by the arrow,then turn the Extender counterclockwise. Maximum Aperture with the Extender When Extender EF2X is attached,the lens maximum aperture will be smaller by 2 stop.In the above two case, the camera will compensate the exposure automatically., Features *RF-602/RF-603 two communication modes RF605 = RF602 +RF603 *TX/RX/TRX multiple working ways *A/B/C/D/E/F 6 groups (compatible with YN560-TX) *Wireless shutter remote control *Clear LCD screen display, shortcut key operation *16 channels *Communication range up to 100M Specification Type: FSK 2.4GHz wireless remote control system Transmission distance: 100m Channels:16 channels Group:6 Groups Shutter release: half-press, full-press Shutter interface: 2.5mm socket Studio flash light interface: standard PC socket Max Sync Speed: 1/320 second Battery: AAA×2(3V ) Size : 85MM x 41MM x 35MM, Features: *RING TYPE DOUBLE LAMP MACRO FLASH Supports flash ratio,and the flash tube A and B can adjusted together or individually, which can creates shadow on the subject to make the photo with engraving effect. *LARGE-SIZE LCD DISPLAY Equipped with large-size LCD display, the flashing function can be checked and set more clearly and visually,which will be more convenient for use. *LED AF ASSIST LIGHT High brightness LED focus assist light to allow focus more easily. *EQUIPPED WITH PC SYNC INTERFACE YN-14M is equipped with standard PC synchronous interface which allows you convenient to use synchronous flash by using PC synchronous line. *SUPPORT THE LENS OF MULTIPLE FILTER SIZE Supports the lens of the following filter size : 52mm、58mm、62mm、67mm. *SOUND PROMPT SYSTEM When the sound prompt system is enabled, different sound modes will prompt different working conditions of the speedlite so as to allow you to focus on shooting process (Note: the sound can be turned off). *HIGH SPEED RECYCLING SYSTEM The recycling time for full output just takes 3 seconds; you can get high speed current-return experience even without using brand new batteries, which will only takes 4~5 seconds. *PROVIDED WITH EXTERNAL POWER SOCKET YN-14M is provided with external power socket to meet your higher demand of recycling time and no longer missing the wonderful moments. *AUTOMATIC SETTINGS SAVING YN-14M can automatically save your current operating settings to convenient your next use., *COMPATIBLE WITH N’s and C’s WIRELESS FLASHING SYSTEM *One YN565EX II is able to accept the internal flashing of YN568EX II, 580EX II, SB-900/800/700,7D/60D/600D, C order of N’s internal flashing and wireless signal of ST-E2,supports 4 channels,achieves external TTL and manual flashing. *TTL FLASH WITH HIGH GUIDE NUMBER *GN58@ ISO100,105mm;supports TTL、M、MULTI flash mode. *MULTIPLE TRIGGER MODE SUPPORTED *YN565EX II can be triggered by the camera set-top, built-in or master control flashing command, S1 and S2 pre-flashing. *SUPPORT AUTOMATIC/MANUAL ZOOMING *The covered focal length can be varied between auto,24~105mm on the lamp adapter by operating the zoom and adjusting button on the flash light; Supports full-frame and half-frame cameras. *COMPREHENSIVELY SUPPORTS TTL FUNCTIONS *FEC, FEB, Rear-curtain sync, FE lock, Aperture preview modeling light, Canon camera menu accessible. *HIGH SPEED RECYCLING SYSTEM *It just takes 3 seconds to finish a charging cycle after a full level output, you can also use external power pack to accelerate the charging speed. *PROVIDES CHARGING SOCKET FOR EXTERNAL POWER PACK *YN565EX II provides charging socket for external power pack, to meet your higher demand for charging recycle. *PC PORT PROVIDED *Allow you more easy to make the flash synchronously by using the PC sync line. *When the sound prompt system is enabled, different sound modes will prompt different working conditions of the speedlite so as to allow you to focus on shooting process. *Press the aperture preview button, the YN565EX II will send out continuous flash which lasting one second for modeling light. *YN565EX II is equipped with advanced options setting function, where you can customize the functions of the speedlite according to your shooting preferences. *YN565EX II can automatically save your current operating settings to convenient your next use. *LCD PANEL USER INTERFACE, ELEGANT APPEARANCE *WITH SOLID AND RELIABLE METAL HOT-SHOE STAND, RF-603 II, the manual flash trigger and shutter release (you can use those two functions simultaneity), it adapts global free FSK 2.4GHz wireless channel With FSK system, can be more effective to guarantee speed, distance and stability Within capacious areas, the remote control distance may reach to 100m, and is suitable for the first generation RF-603 Improved features: Higher sync speed than the first generation The highest flash sync speed up to 1/320 seconds (some of models may only reach to 1/250s or less, difference combination of models of flash and camera using may achieve difference flash sync speed) Adding the locking rings Improved flash/shutter control buttons Working for more non Canon/Nikon cameras and single firing pin cameras All standard hot shoe DSLR camera except Sony and Minolta Adding the power switch for single transmitter Set the power switch on TX (single transmit) or TRX (transmit-receive automatic switch) state according to different shooting requirement Parameters: Type: FSK 2.4GHz wireless remote system Transmitter distance: 100m Channel: 16 channels Release: half-way press, full-way press Receiver interface: one is 2.5mm socket, for shutter release One is standard PC socket for flash speedlite or studio strobe Battery type: AAA*2 Receiver standby time: up to 45 hours (use AAA battery) Size receiver: 37 x 30 x 81.5mm (W x H x D), 1.The YN168 adopts 168 high-quality LED lamp beads of extra-large luminous chips,the brightness is brighter, the light spot is more evenly and the service time is longer 2.The YN168 adopts the encoder digital dimming which can be separately adjusted to rough dimming and fine dimming modes, more convenient to use 3.Adopted the professional LED driving chip, the light is stable and the efficiency up to 93% 4.The camera light can be mounted on the camera as well as fixed on a tripod 5.Four color temperature plates are configured and suitable for use under different environments 6.Provides 3 kinds of power supply mode so as to meet your multipurpose use for a long time, Specification: Circuit design Insulated Gate Bipolar Transistor (IGBT) Guide No. 5 meters (ISO 100, 105mm) Flash mode M, Multi( TRIGGERING MODE :camera set-up,S1,S2,RX) Zoom range 24, 28, 35, 50, 70, 80, 105mm Vertical rotation angle -7~90 degrees Horizontal rotation angle 0~270 degrees Power supply 4XAAsize batteries (Alkaline or Ni-MH are usable) Lighting times 100~1500 times (AA alkaline cell used) Recycle time approx 3s (AA alkaline cell used) Color temperature 5600k Flash time 1/200s~1/20000s Flash control 8 levels of output control (1/128~1/1), 29 levels of fine tuning External interface hot shoe, PC port and eternal charging port. Wireless triggering distance 100(2.4g wireless);20-25m indoor,10-15m out door (optical control), the electronic flash head zooming, sound prompt, automatically saving setting, power saving mode, overheating protection and advanced options. Additional features The electronic flash head zooming, sound prompt, automatically saving setting, power saving mode, overhearting protection and advanced options. Features: 1.Using RF-602/RF-603 2.4G ultra-long-range wireless flash system Adopted by global users trust the allways RF-602/RF-603 wireless flash system.Support 2.4G ultra-long-range wireless flash, the lead flashing distances up to 100 meters above. 2.Full support for RF-603, RF-602 wireless transmitter Same YN560-III can accept RF-603 and RF-602 wireless transmitter emits a signal, supports 16 channels, wireless flash easily. 3.Large-size LCD display The YN560-III is equipped with large-size LCD screen, easy clear, intuitive view or set the flash of the function, and easy to use. 4.Equipped with power zoom function ZOOM button, you can make a lamp covering a focal length between 24 ~ 105mm cycle movements. 5.GN58 @ ISO100, 105mm High index 2.4G radio flash support M / Multi mode. 6.Various trigger synchronization, flexible The YN560-III can be triggered by the camera-top, 2.4G radio trigger, S1 and S2 to avoid the pre-flash-sensitive trigger. 7.Equipped with an external power outlet The YN560-III is equipped with an external power outlet, to meet your higher demand for call back speed, you can buy SF-18 Canon version to fit for it. 8.Equipped with a PC sync port 9.Voice prompt system 10.a speeding call back system Full light output recycling time of just three seconds, even without using the new battery, but also to get the speed of call back experience, only 4 to 5 seconds; You can also use external charging box call back again accelerated. 11.Advanced Options settings 12.automatically save set 13.metal texture hot shoe interface, rugged, reliable, and to the force., Discription: The YN2.0X II teleconverter is the updated version of YN2.0X. 1.The coating, the optical design and optical glass material are more excellent than the first generation. 2.Adopts improved circuit, with better compatibility. *It can autofocus on the EF70-200MM F/2.8 L IS II USM and high-end lens,except the EF-S lens (white dot lens) and Canon 50MM F/1.8, most lens can achieve autofocus. 3.With more elegant and high-grade appearance. Specification: The Magnification: 2 times Coating: multi coating Lens composition: 7 elements in 4 groups Barrel diameter: 68mm approx. Weight: 180g, Specification: Light Source: 300 LED beads Luminance Angle: 55° Color Temperature: 3200K-5500K Average Service Life: 50000 H Color Rendering Index: ≥90% Remote control distance: 8M Power: 18W Weight: 725g Lumen: 2280 LM Size: 173*153*43 Features: 1.YN300-II adopts 300 high-quality LED light beads of extra-large luminous chips,the brightness is higher. 2.The color temperature of YN300-II can be adjusted from 3200-5500k. 3.YN300-II adopts the encoder digital dimming which can be separately adjusted do rough dimming and fine dimming modes. 4.The infrared remote controller is configured,thus the brightness and power switch can be adjusted away from the machine. 5.Adopted the professional LED driving chip,the light is stable and the efficiency achieves 93%. 6.The camera light can be mounted on the camera as well as used by a handle. 7.Four color temperature plates are configured and suitable for using under different environments., Compatible flash mode: i-TTL, Manual flash Compatible Shutter sync: front-curtain sync, rear- curtain sync and high-speed sync(HSS/FP), the highest sync speed is 1/8000s* Support remote set the parameters of flash through the transceiver (Remote Control Mode) Support i-TTL/Manual/Repeating flash mode mix using(Mix Control Mode) Support the flash installed on transmitter(on-top flash)and supports i-TTL function Support the use of master unit on transmitter sets the parameters of each group(Master Control Mode) Support FEC, FVL function Support modeling flash and red-eye reduction flash Support flash zooming (auto) Built-in AF assist beam emitter (AF Lamp) Settings saved automatically Compatible with YongNuo/ Nikon series flashes Support PC port triggering strobe flashes PC port support front/rear curtain sync and high-speed sync(Super Sync)function Support single-contact of camera & flash triggering (max sync speed is 1/250s) ��Compatible cameras/flashes is needed when using TTL function *The highest sync speed of some camera types is 1/4000s,some of flash or camera models may reach to 1/250s only or less if it doesn't support high sync speed., Supported Functions List Compatible flash mode: E-TTL (II)/ Manual/ Multi Compatible Shutter sync: 1st curtain, 2nd curtain,high speed sync (HSS/FP), Max 1/8000s sync speed Control remote flash using camera's flash control menu screen(Remote Control Mode) Support E-TTL / Manual/ Multi flash mode mix using(Mix Control Mode) Flash on hot-shoe of transmitter supports ETTL Support Flash Exposure Compensation (FEC) Support Flash Exposure Bracketing (FEB) Support Flash Exposure Lock (FEL) Support modeling Flash Support E-TTL group ratio (ALL/ A:B/ A:B C) Support Manual/Multi group (ALL/ A:B/ A:B:C) Support flash zooming (auto, manual) Support AF assist beam emitter(AF Lamp) Support PC port triggering strobe flashes and support 1st, 2nd cur tain/HSS (Super Sync) Support LCD Live view triggering Support high-speed continuous shooting trigger Settings saved automatically Compatible with ALL YongNuo/ Canon EXII series flashes Suppor t single-contact of camera & flash triggering (max sync speed is 1/250s) *On compatible cameras/flashes, Specification Model: Yongnuo YN-300 LED Quantity: 300 pcs Color Temperature: 5500k Color Rendering: More than 90% Power: 18W Lumen: 2280 LM Luminance: 55° Average Service Life: 50000 hours Remote Control Distance: >8 meters / 26.3 feet Flash Size: Approx.173X153X43mm/6.8X6.0X1.7'' (Without sunshade open) Total Weight : Approx.725g/25.6oz Features: 1.YN-300 adopts 300 high-quality LED light beads of extra-large luminous chips, the brightness is higher, the light spot is more uniform and the service life is longer. 2.YN-300 adopts the encoder digital dimming and can distinguish the rough dimming and fine dimming modes. 3.A built-in light sensing chip can automatically adjust the brightness of the camera light according to the environmental light intensity. 4.The infrared remote controller is configured, thus the brightness and the switch can be adjusted in off state. 5.The professional LED driving chip is adopted, the light is stable and the efficiency achieves 93%. 6.The camera light can be mounted on the camera as well as used by a handle. 7.Four color temperature plates are configured and suitable for using under different environments., Specifications: Color: Black LED quantity: 160 pieces Color Temperature: 5600K Color Rendering Index: more than 87.5% Power: 10W Lumen: 1280LM Luminance Angle: 55 degree Average Service Life: 20000 Hours Product dimensions: 150 x 115 x 60mm Net weight: 380g Package dimensions: 180 x 155 x 70mm Package weight: 720g Description: 1.High-quality large light-emitting area LED beads offer higher brightness with the same energy consumption 2.The first LED camera lamp with built-in condenser MIC ( 3.5mm MIC outlet )worldwide 3.Auto luminance adjustment based on ambient luminance 4.The IR remote control provides off camera luminance adjustment and power on and off 5.Professional LED driver IC offers light stability and a light efficiency as high as 93% 6.Adjustable Color Temperature --- There are 4 CT filters available for different environments 7.Support Handheld Mode 8.Multi-mounting Model 9.AutoSave Setting -- Automatically save your current operations settings to facilitate your usage next time. 10.The metal hot shoe connector is sturdy, reliable and awesome, Specification: Circuit design Insulated Gate Bipolar Transistor (IGBT) Guide No. 58 meters (ISO 100, 105mm) Flash mode TTL, M, MULTI Wireless trigger N's & C's wireless system, S1, S2 pre-flash-canceled mode Wireless triggering distance 20~25m indoor, 10~15m outdoor Slave groups 3(A, B, and C) Channels 4 Zoom range 24,28,35,50,70,80,105mm Vertical rotation angle -7~90 degrees Horizontal rotation angle 0~270 degrees Power supply 4XAAsize batteries (Alkaline or Ni-MH are usable) Lighting times 100~1500 times (AA alkaline cell used) Recycle time approx 3s (AA alkaline cell used) Color temperature 5600k Flash time 1/200s~1/20000s Flash control 8 levels of output control (1/128~1/1), 22 levels of fine tuning External interface hot shoe, PC port and eternal charging port External power YONGNUO External Flash Pack like SF-18C, SF-17C Wireless triggering distance 20~30m indoor,10~15m outdoor Additional features Rear-curtain sync, FEC, FEB, FEV, modeling flash, manual zoom, auto zoom, sound prompt, advanced setting, automatically saving setting, PC port, power saving mode and over heat protection Dimensions 60X190X8mm (Extended state) Net weight 380g 1.Supporting Canon and Nikon Wireless TTL Slave Mode 2.TTL Flash with very powerful guide number GN58 @ ISO100, 105mm, support TTL, M, Multi mode 3.Can be fired via multiple ways via master flash on camera, camera with built-in commander mode,optical S1 and S2 4.Auto and manual zoom functions Has a 24-105mm focal length, supports full-frame / half-frame camera 5.Full support TTL Functions FEC, FEB, Rear-curtain sync, FV lock, Modeling Light, Menu Access of Nikon camera 6.Higher Speed of Charging Recycle It only takes 3 seconds to finish a charging cycle after a full level output, you can even use external power pack to accelerate the charging speed. 7.Advanced Features a) Charging Socket for External Flash Pack b) PC Port c) Sound Prompt System 8.Modeling Light Function 9.Advanced Setting and Automatic Saving Setting, Overheating Protection. 10.Wireless Sensor. 11.LED Display and Metal version Hot shoe., Features: 1.Adaptable to different brand and different models DSLR 2.Supports many size convert ring.( 49 / 52 / 55 / 58 / 62 / 67 mm) 3.Smart size, lite weight, low power consumption, easy to use and operate 4.High brightness LED, you can do a great work without big light device. 5.Multiple lighting mode and adjustable brightness, totally meet the needs of usual macro photographing. 6.Widely use, easy to photograph any macro works like jewelry, electronics, watches, perfume and cosmetic. Specification: 60 LED Lights LED Color Temperature:5500K Power source: 3 x AAA Battery ( Please kindly note that the batteries are not included ) Battery Using Time:2 hours LED Brightness: 450lum LED Life: >10000 hours Color: Black Size: 10 x 2.5cm, Specification: Circuit design Insulated Gate Bipolar Transistor (IGBT) Guide No. 53 (ISO 100, 105mm) Flash mode M, Multi, Sc, Sn S1, S2 Zoom range 24, 35, 50, 70, 80, 105mm Vertical rotation angle -7~90 degrees Horizontal rotation angle 0~270 degrees Power supply 4XAAsize batteries (Alkaline or Ni-MH are usable) Lighting times 100~1500 times (AA alkaline cell used) Recycle time Appro x 3s (AA alkaline cell used) Color temperature 5600k Flash time 1/200s~1/20000s Flash control 8 levels of output control (1/64~1/1), 25 levels of fine tuning External interface hot shoe, PC port Wireless triggering distance 20~25m indoor, 10~15m outdoor Additional features Rearcurtain sync, FEC, FEB, FEV, the electronic flash head zooming, sound prompt, automatically saving setting, PC port, power saving mode, over heat protection, advanced setting. Dimensions 62X72X165mm (Extended state) Net weight 320g Features: *COMPATIBLE WITH N's & C's WIRWLESS FLASH SYSTEM The YN510EX can be triggered by 600EX-RT, 580EX II, SB-910/900/800/700, 7D/60D/600D, C command of Nikon's built-in flash and wireless signal of ST-E2 respectively, realizing off-camera TTL mode as well as manual flash.You just need a camera equipped with built-in commander system and the YN510EX, then can be easy to achieve wireless TTL flash, ratio control of TTL flash, remote control the flash luminance and other attractive functions. *SMALL FIGURE, LARGE INDEX GN53@ ISO100, 105mm; Reach the same level of the mainline hot shoe flash, supports off-camera TTL, M and Multi flash mode. *SUPPORTS REMOTE TTL FUNCTIONS In the off-camera Sc/Sn mode, FEC, FEB, Rear-curtain sync, FE lock is supported. *MULTI FLASH SUPPORTED YONGNUO new manual speedlite which supports Multi mode. *MULTIPLE TRIGGER MODE SUPPORTED The YN510EX can be triggered by the set top of camera, built-in flash, command of the main control flash, optical S1, and S2 (pre-flash-canceled mode). *SUPPORTS ELECTRIC ZOOMING(24~105mm) The YN510EX covers a focal length range of 24~105mm by operating the zooming buttons. *HIGH SPEED RECYCLING SYSTEM It just takes 3 seconds to finish a charging cycle after a full level output.Even without new batteries, you can get high charging speed that just takes 4 to 5 seconds. *PC PORT PROVIDED *SOUND PROMPT SYSTEM *ADVANCED OPTION FUNCTION *AUTOMATIC SETTINGS SAVING *METAL HOT SHOE STAND, SOLID AND RELIABLE, Parameters: Guide Number: 38 (at 35mm focal length, ISO 100 in meters) 53 (at 35mm focal length, ISO 200 in meters) Flash Mode M, S1, S2 Power Ratio Full, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/7 Number of Flashes Approx.100-1500, with fresh AA size alkaline batteries Recycling Time Approx.0.1-5 Sec., with fresh AA size alkaline batteries Bounce Flash Vertical: Up to 90°/ Horizontal: Left 180°, Right 90° Flash Speed 1/800s - 1/20000s Color Temperature 5600k Slave Mode S1 Normal Optic Slave Slave Mode S2 Pre-flash Cancel Slave Power Source 4pcs AA-size Battery - alkaline, Lithium, or Rechargeble Ni-MH usable Power Saving 30Mins to Power off, or 60mins to Power off on the optical slave mode Dimensions 72*135*85mm Net Weight 250g Features: New upgraded Flash Speedlite for YN-460, more powerful and convenient. 1.We increased the Flash index from 33 to 38(at 35mm focal length, ISO 100 in meters) and 53 (at 35mm focal length, ISO 200 in meters); 2.This YN-460 II has the output power fine-tuning fucntion, If the 7 output power can't meet your demand, You can press " + " or " - " buttons to fine tune the output power of the flash with step length of 1/7 ev in order to obtain finer exposure control, so there are 48 step length for you to choose.( There is just 7 setp length for the first version.) 3.The recyling time is much faster than the first version., Specification: Circuit design Insulated Gate Bipolar Transistor (IGBT) Guide No. 53 meters (ISO 100, 105mm) Flash mode TTL, M, MULTI, Sc, Sn, S1, S2 Wireless triggering distance 20~25m indoor, 10~15m outdoor Zoom range Auto, 24, 35,50,70,80,105mm Vertical rotation angle -7~90 degrees Horizontal rotation angle 0~270 degrees Power supply 4XAAsize batteries (Alkaline or Ni-MH are usable) Lighting times 100~1500 times (AA alkaline cell used) Recycle time approx 3s (AA alkaline cell used) Color temperature 5600k Flash time 1/200s~1/20000s Flash control 7 levels of output control (1/64~1/1), 25 levels of fine tuning External interface hot shoe, PC port Additional features Rear-curtain sync, FEC, FEB, FEV, modeling flash, manual zoom, auto zoom, sound prompt, advanced setting, automatically saving setting, PC port, power saving mode and over heat protection Dimensions 62*72*165mm ( Extended ) Net weight 320g Features: Support HSS, the High Speed Sync, up to 1/8000 second Wireless TTL Slave for Canon and Nikon Hot shoe TTL for Canon Guide Number 53 (ISO 100, 105mm) Flash Modes: ETTL / i-TTL, M, Multi Mode Modeling Light Auto and Manual Zooming Head 24 �C 105mm Auto Zoom for Sensor Size PC Sync Port 3 Seconds Recycle TimeCons No Wireless TTL Master Mode Not Support External Power, 1.SUPPORTS MASTER TTL FLASH Supports Exposure Compensation, FEB, Rear-curtain sync, FE lock, Modeling Light, Canon camera menu accessible. 2.RING TYPE DOUBLE LAMP MACRO FLASH Supports flash ratio, and the flash tube A and B can adjusted together or individually, which can creates shadow on the subject to make the photo with engraving effect. 3.LARGE-SIZE LCD DISPLAY 4.LED AF ASSIST LIGHT 5.EQUIPPED WITH PC SYNC INTERFACE 6.SUPPORT THE LENS OF MULTIPLE FILTER SIZE 52mmX58mmX67mmX72mm. 7.SOUND PROMPT SYSTEM 8.HIGH SPEED RECYCLING SYSTEM 9.PROVIDED WITH EXTERNAL POWER SOCKET 10.AUTOMATIC SETTINGS SAVING Specification Macro Ring Flash YN-14EX Circuit Design Insulated Gate Bipolar Transistor Type Automatic annular flash for macro shots Guide No. 14 ( ISO100, 105mm ) Flash Coverage Vertical rotation angle about 80 degree / Horizontal rotation angle about 80 degree Flash Mode TTL, M Lighting Times 200-2500times Color Temperature 5600k External Interface Shoe, PC port and external charging port Flash Ratio Control With the precision of 1/2 EV within the range of 8:1 - 1:1 - 1:8 Power Supply 4 AA alkaline battery or AA Nichelmetal hydride battery ( NI-MH ) Recycle time approx 3S Flash Control 7 levels of output control ( 1/64 - 1/1 ), 19 levels of fine tuning Flash Unit Dimension 135*123*26mm Control Unite Dimension 153*74*56mm Net Weight 420g, Specification: Circuit design Insulated Gate Bipolar Transistor (IGBT) Guide No. 58 meters (ISO 100, 105mm) Flash mode M, Multi, Sc, Sn S1, S2 Zoom range 24, 28, 35, 50, 70, 80, 105mm Vertical rotation angle -7~90 degrees Horizontal rotation angle 0~270 degrees Power supply 4XAAsize batteries (Alkaline or Ni-MH are usable) Lighting times 100~1500 times (AA alkaline cell used) Recycle time approx 3s (AA alkaline cell used) Color temperature 5600k Flash time 1/200s~1/20000s Flash control 8 levels of output control (1/128~1/1), 29 levels of fine tuning External interface hot shoe, PC port Wireless triggering distance 20~25m indoor, 10~15m outdoor Additional features Rear-curtain sync, FEC, FEB, FEV, the electronic flash head zooming, sound prompt, automatically saving setting, PC port, power saving mode, over heat protection, advanced setting Dimensions 60X73X190mm (Extended state) Net weight 350g Features: Multi flash supported; GN58 @ ISO100, 105mm: Yongnuo new large guide number manual speedlite, supporting remote TTL and M, Multi modes Multiple trigger mode supported: The YN-560EX can be triggered by hot-shoe, flash command slave mode, optical S1 and S2 (pre-flash-cancelled mode). Supports motor zooming (24-105mm): The YN-560EX covers a focal length range of 24-105mm by operating the zooming buttons Supports remote TTL functions: In the case of remote mode, FEC, FEB, Rear curtain sync, FE lock is supported Super speed of charging recycle: It only takes 3 seconds to finish a charging cycle after a full level output. 2.5mm type PC port provided; Sound prompt system; Advanced settings on flash; Automatic settings saving., Specification: Type:FSK 2.4GHz wireless remote sustem Transmitter Distance:100M Channel:15 difference channels and All channels Release:Half-way press, Full-way Press Transmitter Terminal:PC 3-Pin input terminal Receiver Terminal:Yongnuo 3-pin output terminal Time of shooting:Up to 20000 times (Using CR2 Lithium battery) Receiver Stand-by time:Up to 45hours (Using AAA battery) Dimensions:Transmitter : 38.4 x 48 x 27mm (W x H x D) Receiver : 33 x 78 x 26mm (W x H x D) Discription: This RF-602 is using FSK 2.4GHz wireless frequency, suitable to use this free channel in many countries, guarantee of the transfer speed, distance and stability.There are three kinds of plugs, you can not only use it as a wireless remote shutter release, but also can use it as a flash trigger, you can connect them to control many types of flash speedlite and camera.What's more, if you have a new different camera, it's no need to buy a new RF-602, you just need to buy a related plug to connect with your camera, it's very convenient and easy to use it, I think it's a very good choise for you. *It can be used as wireless remote shutter release and wireless flash trigger., Description : 1.ND filters (Neutral Density) reduce the amount of light reaching the film without affecting the color.Can be used to enable slower shutter speeds.Also can be used to better separate subjects from the background by allowing wider apertures, effectively decreasing depth of field.Great for portraiture and outdoor scenes. 2.This filter is mounted on a rotating frame allowing the user to determine the desired amount of light transmittance by simply rotating the filter. Features: Silm -- Thin Frame Frame Material: Black Alumite with Knurling Edge Filter Size: 77mm Frame thickness: 6mm Suitable for: All lenses with 77mm filter. Package Includes: 1 X 77mm YONGNUO Slim Variable ND Filter 1 X Protective Case, Discription: 1.CPL filters (Circular Polarizer) are great for removing unwanted reflections from non-metallic surfaces such as glass or water.Take richer scenic shots and notice improved clarity in distant objects by cutting through haze and increasing color saturation.This filter is mounted on a rotating frame allowing the user to determine the desired amount of reflection to be removed by simply rotating the filter. 2.This filter is mounted on a rotating frame allowing the user to determine the desired amount of reflection to be removed by simply rotating the filter. Features: Silm -- Super thin Frame Frame Material: Black Alumite with Knurling Edge Filter Size: 77mm Frame thickness: 5mm Suitable for: All lenses with 77mm filter. Package Includes: 1 X 77mm YONGNUO Slim CPL Filter 1 X Protective Case, This wireless flash trigger was designed for Sony and Minolta Camera, you can mount the transmitter into the hot shoe of Sony and Minolta Camera directly without using any adapter.However, the receiver is with standard ISO hot shoe. 1.Equipped with sensitive light senser on this receive that can rigger the flashlight separately (without flash transmitter). 2.Trigger the flashlight with the CTR-301 transmitter together. 3.1/4 stand Tripod screw hole can be mounted into the tripod, ballhead, and so on. 4.Trigger the vedio flash via the PC cable ( The little plug is 2.5mm, the big plug supports 6.35mm standard vedio flash jack)., Specification: Guide Number 33 Flash Mode TTL / M / S1 / S2 Circuit design Insulated Gate Bipolar Transistor (IGBT) Vertical rotation angle -7~90 degree Horizontal rotation angle 0~270 degree Power 4 X AA size Batteries ( Alkaline or Ni-MH are usable) Lighting times 100 - 1500 times (with alkaline batteries) Recycle Time approx 5s ( AA alkaline cell used) Color Temperature 5600K Flash Duration 1/800S - 1/20000S Flash Control TTL auto flash or manual level 7 light quantity output contral Dimensions 72 x 135 x 85mm Net Weight 250g Features: Upgraded new Yongnuo flash unit YN-467 II, we improved on some functions. 1.Add a PC port, and then you can use it off camera via a PC Sync cable. 2.Change the batteries room from two ways into one way. 3.Change the controls on the rear panel. Keep below functions as the first generation: a.TTL mode, the metering system of this camera will detect flash illumination reflected back from the object so as to automatically control flash output in this mode.In this E-TTL mode, you can also make compensation of flash brightness with the " Output contral knob" within the range of ��1.5ev, with the precision of 0.5ev.( The compensation value can be added to the compensation value set on the camera.) b.Auto Zoom, The flash speedlite will move forward and backward with the changes of lens focus to suit different illumintion zones when it is mounted on the camera which supports E-TTL Function, the zoom range is 24mm - 85mm. c.M mode, you can set flash luminance as per your favorite, luminance level will be displayed by luminance indicator.When taking photos, you only require setting the flash luminance, adjust the camera and press the shutter, the flash light will flash under the camera synchronous signal. d.S1 Mode, it will work with the first work of the master flash synchronously in this mode, with the result consistent with the use of radio slave.( When you use this mode, your master flash should be set at manaul flash, the TTL flash system with pre-flash function and the red-reduction function with multiple flashes should not be used.) e).S2 Mode, it is very similar to S1 mode, but it can support the master flash in TTL mode.In particular, if S1 mode can not have correct and synchronous flash with the inbuilt flash, you can try to use S2 mode., This RF-602 Shutter Release Cable is used to be connecting RF-602 receiver with camera to achive the function of wireless remove control. As you know, there are five types for RF-602, and each type just fits for some specific cameras, so 1.if the set you have is the type fits for Nikon Camera, but you want to use it in other Nikon camera, and then you just need to buy this cable to replace the original one. 2.All RF-602 receivers is the same, just the transmitter for Nikon and Camera version and the shutter release cable are different. Suitable for camera:Nikon D90 D5000, Specification: Flash index: 33 Circuit design: IGBT Up/down ward angle: 0-90 degree Left/right angle: 0-270 degree Power Source: 4 X AA size batteries (Alkaline or Ni-MH are usable) Battery Life: 100 - 1500 times (with alkaline batteries) Recycle Time: 5 sec(with alkaline batteries) Color Temperature: 5600K Flash Duration: 1/800S - 1/20000S Flash adjustment: "7 difference flash power level ( 1/1, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64 )" Power Saving: " Stand by mode, 30mins to power off mode.60mins to power off when using the optic mode." Dimensions: 72X135X85mm Net Weight: 250g Function: Reflector/Soft board, Diffusing board, Optic control sensor ( It can be fired by light under the mode of " S1" and "S2") Assist light ( You can used this YN-460 as the second flashgun when you set it up under the " S2" mode) Flash head, Battery cover Lock ring, Hot shoe mount, Connect point Mode select button, Pilot signal light, Mode Button, Power Switch, Mode select indicator, Test button Flash power level button, Specification: Type FSK 2.4GHz wireless remote sustem Transmitter Distance 100M Channel 16 Channels Release Half-way press, Full-way Press Receiver Interface one is 2.5mm Socket, for shutter release one is standard PC socket for flash Speedlite or studio Strobe Battery Type AAA*2 Receiver Stand-by time Up to 45hours (Using AAA battery) Size Receiver : 37 x 30 x 81.5mm (W x H x D) Discription: New designed Flash Trigger RF-603, it's a updated version to RF-602, it has the function of Flash Trigger to fire flash Speedlite, Flash Trigger to fire Flash Strobe light, Remote Shutter Release and Wireless Remote Switch.What's more, you can use the flash trigger and remote shutter release function simultaneity., Specification: Type:FSK 2.4GHz wireless remote sustem Transmitter Distance:100M Channel:15 difference channels and All channels Release:Half-way press, Full-way Press Transmitter Terminal:PC 3-Pin input terminal Receiver Terminal:Yongnuo 3-pin output terminal Time of shooting:Up to 20000 times (Using CR2 Lithium battery) Receiver Stand-by time:Up to 45hours (Using AAA battery) Dimensions:Transmitter : 38.4 x 48 x 27mm (W x H x D) Receiver : 33 x 78 x 26mm (W x H x D) Discription: This RF-602 is using FSK 2.4GHz wireless frequency, suitable to use this free channel in many countries, guarantee of the transfer speed, distance and stability.There are three kinds of plugs, you can not only use it as a wireless remote shutter release, but also can use it as a flash trigger, you can connect them to control many types of flash speedlite and camera.What's more, if you have a new different camera, it's no need to buy a new RF-602, you just need to buy a related plug to connect with your camera, it's very convenient and easy to use it, I think it's a very good choise for you. *It can be used as wireless remote shutter release and wireless flash trigger., Specification: 1.The Flash Diffuser Cover provides an easy and convenient softening solution to your flash photography needs. 2.Diffusion Material effectively spreads light evenly on your subject, preventing harsh shadows. 3.It helps eliminate the annoying red eye., Description : 1.This UV lens filter absorbs the ultraviolet rays, which often makes outdoor photographs hazy and indistinct. 2.This UV lens serves to protect the lens from scratching, dirt, dust and water. 3.Designed by YONGNUO company. Features: Silm -- Ultra thin Frame Frame Material: Black Alumite with Knurling Edge Filter Size: 77mm Frame thickness: 3.5mm Suitable for: All lenses with 77mm filter. Package Includes: 1 X 77mm YONGNUO Slim UV Filter 1 X Protective Case
Contact Now
supplier(s) selected
Contact Now

China and Hong Kong Radio Transceiver Manufacturers/Suppliers Products