Recommended Suppliers
Laudex Company Ltd.

Laudex Company Limited

For over 30 years we have tried to develop the internal connectors, the CHOISE® CONNECTOR, for connecting metal tubes. The tubes can be used to establish metal framework for shelves, boxes, furniture and others. Now we have formed sets of CHOISE® CONNECTOR that can connect the tubes together ideally on DIY basis. The framework formed is stable, similar to be welded together.

Preparation:  As shown in the photographs, the square tubes are combined by the internal connectors to form the layers of the framework. The square tubes can have longitudinal edge stretching along the tube. Then the circular tubes are fixed between the vertical arms of the connectors between the layers to have the 3-dimensinal structure of the framework. The glass or wooden plates can be fixed to the framework during the formation of the layers and the combination of the layers on the edges of the tubes, when that is necessary. Alternatively they can be placed to the supporting edge of the tubes at last after the formation of the metal framework. That depends on the requirements.

Appearance: The surfaces of the connectors do form smooth surface with the tubes, and there are no observable holes in the framework. That does overwhelm those products formed by other connectors. The Shape can be the common rectangular cylinder. The shape of the cylinders can also be hexagonal, octagonal and etc... by using the corresponding connectors for particular cylinders. It can also be a combination of the above cylinders. The tubes with the longitudinal side edges support and clip the plates at the right position. The shape of the tube plays another important glorious part for the device formed. The Device formed under this way is smooth and natural.

Design:  As stated above, we can connect the tubes together ideally on DIY basis. That means you can design the framework. By cutting the tubes to the proper length, the framework you design can be easily prepared. We will supply some of those shelves with standard size. Anyway, all these can be used in home, office, factory, or to be used as showcase in the shop.

Stability: The stability of the framework formed by the internal connectors and tubes is a challenge to us all the way long. We develop the working principal for the connectors. The principal has got the patent on most of the developed countries. The Customer can use a proper ball-end- hex screw-driver to fix the tube stably to the connector. The friction force is great, in some way similar to be welded together. The stable metal central body of the connector is closely connected to the tune to form the framework.

Reconstructability: The Shelf or the framework can easily be modified as the tubes can easily be disconnected partly or completely from the connectors. Besides, those plates are well protected by the metal framework. When the metal framework or showcase is disconnected to its basic layer structures or materials, it is convenient for transportation. The framework or showcase is ready to be reconstructed. Besides, that also means any damage in the metal framework can be replaced. Furthermore, upon redecoration, the shelf or showcase can be modified for the new environment. We do believe all these are great deeds for the protection of environments.

Cost:  All the way long, we insist the formation of the connector must be simple, and the cost must be reasonable. The elementary parts that form the CHOISE® CONNECTOR and the metal tubes are kept at the low price by mass production.

This is the first stage of our production. In the near future, there will be framework formed by only square tubes and connectors, and framework with the connectors hidden under the tubes. Perhaps this can lead the metal furniture to be widely used in our daily life.

However, we need the corporation of Furniture Companies to help us to promote the business. That surely will be beneficial for both parties.

Those figures present here can be divided in accord with

A. The angles between the arms for those square tubes: This determines the shape of the cylinder.

I. These are the common normal cylinders

a. The normal right angle: The metal framework formed in this way will be normal rectangular cylinder.
b. The angle between the arms is 120°: In this way we can have hexagonal cylinder.
c. By changing the angle between the arms to be 135°, we can have octagonal cylinder.

II. BY choosing the proper Choise Connectors, we can have combined cylinders. For example it can be partly rectangular, and partly hexagonal.

B. The size of the cross-section of the square tubes: Presently the common side-length is either 19.05 mm or 12.7 mm. The diameter of the round tube is the same or a little larger. The side-length can be larger. The simple shelves of both size have passed the S.G.S. tests of the European standard. Surely the one built with the larger tubes has a stronger power of support.

C. The shelves or framework can be combined linearly or in the backward direction by choosing the right connectors, which has more arms for the square tubes.

Company Profile

  • Business Type:
  • Manufacturer
  • Country:
  • Hong Kong (China)

Contact Information

  • Company Name:
  • Laudex Company Ltd.
  • Country:
  • Hong Kong (China)
  • Address:
  • Room D 7/F, Yiko Industrial Building, 10 Ka Yip st., Chai Wan, HongKong.
  • Website:
  • http://www.laudex.com.hk

©1997- Tradeeasy.com. All rights reserved.