Line Interactive Ups

Primary Technical Parameter
Capacity:1200VA/720W
Input voltage:85VAC-135VAC or 165VAC-275VAC
Input frequency:50Hz+/-5% or 60Hz+/-5%
Output voltage:110VAC or 220VAC
Output voltage regulation:+/-6%
Output frequency:50Hz or 60Hz
Output frequency regulation:+/-1Hz
Output waveform:Modified sine wave
Output power factor:0.6
Output transfer time:Less than 4ms(typical)
Battery type:12V/7AH/2PCS
Battery back-up time:(a PC with 15" monitor):45 minutes
Battery recharge time:10 hours
Battery terminated voltage:9.2+/-0.2V
Indicator:LED indicator for line on, battery back-up, UPS cut off
Alarm for battery back-up:Sounding every 3 seconds
Alarm for battery low:Sounding every 1 second
Alarm for overload:Continue beeping sound
Overload protection:Fuse¤t limited
Short circuit protection:Fuse¤t limited&cut-off
Low battery protection:No battery drain after cut-off
Physical dimension(DxWxH):34x13.3x19.5cm; Physical net weight:12KGS
Operating Temperature:32�F-104�F at full load, 0-90% relative humidity(-5℃-40℃)(non-condensing)
Noise level:Less than 40db(at 1 meter)
Interface contact closure:DB9 connector for connecting with UPS software
Interface software: Rups 2000(Option)
Tel./Moderm/Fax/Internet:RJ11/RJ45