yayu

hose crimping machine (1/4''-2'' 4SP)
1.Operation Mode Automatic
2.precision 0.02mm
3.Rated pressure 31.5 MP
4.Dies:10set




automatic hose crimping machine (1/4''-2'' 4SP)



1. Brief Introduction

Model YAYU-50-33 hose crimping machine is mainly used for buckling processing for high pressure rubber pipe assembly in the mechanical engineering. It can also be used for buckling the two-way bends, especially large bends and irregular shape bends.

This machine features small and portable appearance, big force, low noise and easy to operate. The buckling amount can be precise adjusted through a scale. It makes the mould base division to be more even through the double inclined plane eight-flap mould seat equipped with a high accuracy guiding device.



2. Main Technical Feature of YAYU-50-33 hose crimping machine

Crimping range: Φ6—Φ51mm

Max. crimping force: 400T

Scale accuracy: 0.02mm

Rated pressure: 31.5 MPa

Oil pump displacement: 5ml/rad (380V); 2.5ml/rad (220V)

Overall dimensions: 670(L)×490(W)×780(H)mm

3. Installation and Operation of hose crimping machine

1). Add sufficiently 79 liters of Great Wall brand 46# anti-abrasion hydraulic oil. If the room temperature is lower than 10°C, 10% transformer oil is need to add.

Connect the electric source well as per the machine requirements, to make the direction of the motor rotation to be consistent with the rotation direction marking, and grounding protection shall be done.

2). Regulating the scale of hose crimping machine
The scale is used for regulating the amount of the buckling. When it is regulated clockwise, the buckling amount will decrease, when it is regulated anticlockwise, the buckling amount will increase. The scale is connected together with oil cylinder end cover through three socket head screws and three springs on the scale base. When using a hand to pull the scale (vertical to the oil cylinder end cover direction),