Dreambox 500c Cable Receiver, Dm500c

The Dreambox 500c Cable Receiver?is the smallest digital Linux SetTopBox based receiver with card sharing function. - 250 MHz IBM PowerPC Processor (350 Mips) - Linux Operating System - 1 x Smartcard-Reader - MPEG2 Hardware decoding - Common available NIMs (DVB-S, DVB-C) - V.24/RS232 Interface - 2 LED status - Unlimited channel lists for TV/Radio - Channel-change time 1 second - Full automatic service scan - Supports directly bouquet-lists (indirect unlimited) - Supports EPG (electronic program guide) - Supports multiple LNB-Switching control (supports DiSEqC) - Fully adaptable OSD in many languages (skin-support) - SPDI/F Interface for digital bit stream out (AC-3 / DTS) - 1 x Scart-interfaces (fully controlled by software) Dreambox 500c Cable Receiver DBS-Tuner: Input Symbol rate 2 .. 45 Mbaud/s, SCPC / MCPC FEC Viterbi and Reed-Solomon Viterbirate 1/2, 2/3, 3/4, 5/6, 7/8, automatic assimilation Roll-off Factor 35 % Demultiplexing according ISO 13818-1 Dreambox 500c Cable Receiver Audio decoder: Audiokompression MPEG-1 & MPEG-2 Layer I and II Audio Mode Dual (main/sub), Stereo Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz Dreambox 500c Cable Receiver Output digital: Output Level 0,5 Vss o-n 75 Ohm Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz S/PDIF-Output optical (AC3) Dreambox 500c Cable Receiver Video parameter: Input Level FBAS 1 Vss +/- 0.3 dB o-n 75 Ohm Teletext filter in conformity with ETS 300 472 Standard Dreambox 500c Cable Receiver TV-Scart: Output: FBAS,RGB,S-VHS over OSD selectable Dreambox 500c Cable Receiver Ethernet: 100 MBit compatible, bi-direktional interface Function Update of Firmware and Preprogramming Dreambox 500c Cable Receiver Serielle Interface RS 232: Typ RS232 bidirectional Bitrate 115,2 kBit/s max. Plug Connector SUB-D-9 Function Update of Firmware and Preprogramming Dreambox 500c Cable Receiver Physical specification: Ambient Temperature +15