Sell Paper Tape
Sell Paper TapeContinuous Selling Item
Sell Paper Tape
Drywall joint Paper Tape
Application: www. xiujun. com fibergls @ pub. nt. jsinfo. net
Drywall Joint Paper Tape is a quality tape designed for use with joint compound to reinforce gypsum board joints and corners prior to painting, texturing and wallpapering. Joint tape is super strong both wet and dry. The tapered edges offer invisible seams. Joint tape is sparked, making it the type preferred by professionals.
Specification:
50mmX23m, 50mmX75m, 50mmX150m. etc.
Other specification upon customer’s request.
How to Finish Wallboard Joints:
1. Firmly press joint compound into wallboard joints over an approximate 4inch wide area.
2. Center Joint Paper Tape in compound, over hidden crack and embed tape into compound. Cover tape with a thin coat of compound. Remove excess.
3. Make sure nail heads are driven in at least 1/32inch. Apply joint compound to nail head indentations.
4. After bed coat compound is completely dry (at least 24 hours) apply another thin coat of compound and feather out to a 3-4inch width on each side. Apply second coat to nail heads.
5. Allow the preceding coat to dry and apply another thin coat, feathering out to a total width of about 8” on each side. Apply final coat to nail heads.
6. When completely dry, at least 24 hours after final coat, sand smooth.
www.xiujun.com
Application: www. xiujun. com fibergls @ pub. nt. jsinfo. net
Drywall Joint Paper Tape is a quality tape designed for use with joint compound to reinforce gypsum board joints and corners prior to painting, texturing and wallpapering. Joint tape is super strong both wet and dry. The tapered edges offer invisible seams. Joint tape is sparked, making it the type preferred by professionals.
Specification:
50mmX23m, 50mmX75m, 50mmX150m. etc.
Other specification upon customer’s request.
How to Finish Wallboard Joints:
1. Firmly press joint compound into wallboard joints over an approximate 4inch wide area.
2. Center Joint Paper Tape in compound, over hidden crack and embed tape into compound. Cover tape with a thin coat of compound. Remove excess.
3. Make sure nail heads are driven in at least 1/32inch. Apply joint compound to nail head indentations.
4. After bed coat compound is completely dry (at least 24 hours) apply another thin coat of compound and feather out to a 3-4inch width on each side. Apply second coat to nail heads.
5. Allow the preceding coat to dry and apply another thin coat, feathering out to a total width of about 8” on each side. Apply final coat to nail heads.
6. When completely dry, at least 24 hours after final coat, sand smooth.
www.xiujun.com
- Payment Terms:
- ;T/T
- Delivery Time:
- 15