Fusion Splicer Pt-630

Features
Fiber core can be display clearly
SingleX or Y view and X & Y view simultaneously
Auto check quality of cleaved end face
Auto select best splicing program
9 seconds splice time and 30 seconds heat time
Small bulk and light weigh
5 inch color LCD monitor with clear digital image display
Simple Operation menu
Software upgrade via USB interface
Specification
Model Pt-280
Applicable fibers SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T G.655)
Fiber cleaved length 12-16mm(Coating diameter:250um)
16mm(Coating diameter: 250 -1000um)
Fiber diameter Cladding diameter:80-150um
Coating diameter:100-1000um
Fiber Count Single
Fiber aligning method Core aligning
Image processing method Digital
Actual average splice loss 0.02dB (SM), 0.01dB (MM),
0.04dB (DS), 0.04dB( NZDS)
Splicing time Typical 9 sec,with standard SM fiber
Splicing mode 53(templet), 40(user)
Splice loss estimate More accurate
Return loss >60dB
Storage of splice result 5000 results,3 parameter per result
Fiber display and magnification 400X(X or Y view),200X(X and Y view)
Tube heating time Typical 30 sec
Tube heating mode 9(templet), 24(user)
Tube heating temperature Can be adjusted
Applicable Protection sleeve length 60mm, 40mm and a series of micro sleeves
Tension test 2N
Electrode life 2500
No.of splice/heating with battery Typical 130 cycles (splice/tube heat) with inner Li-battery
Display screen 5 inch color LCD monitor
Image change over The fiber image is turned upside down
Terminals RS 232
Operating condition 0 - 5000m above sea level, 0 -95%RH and -10-50*, respectively, Max. wind velocity of 15m/s
Power supply AC 100-240V with AC adapter; inner Li-battery(6600mAH)
Dimensions 150mm(L) x150mm (W) x150mm (H)
Weight 2.7 Kg excluding battery,3.2 Kg including battery