Silicone Rubber Sponge Sheet

Honeywon's silicone rubber sponge sheet silicone sponge sheet silicone sponge pad silicone rubber sponge foam silicon sponge mat silicone sponge blanket silicone sponge panel silicone rubber sponge mat silicone rubber sponge blanket silicon foam mat silicone foam blanket silicone rubber foam pad silicone rubbe foam mat silicone foam pad silicone rubber sponge foam silicone rubber sponge roll thermal gap filler pad thermal gap filler mat thermal gap filler blanket Honeywon's silicone sponge is with high grade silicone rubber material and inimitable technique, with
good character of high temperature resistant, aging resistant, ozone resistant, insulation property, fuel
oil resistance, lubes resistance, no smell and wear well. High compressibility and low compression set
over a wide temperature range, and good acoustic and thermal insulation properties. Apply to -50℃
~+200℃ protect and heat insulation for long term continuous use and -70℃ ~ +260℃ for intermittent
use on all kinds of machine.


Feature:
[Standard size(mm)] 290*380*(5-15) 380*380*(5-15) 400*600*(5- 15) 500*500*(2-30)
500*600*(5-15) 600*800*(5-15) 1000*1000*(5-12) 1000*1200*(5-12)

[Special size(mm)]Minimum length:no limitation Maximum length:no limitation,or in roll
minimum width:no limitation maximum width:1200 minimum thickness:3.0 maximum
thickness:30.0

[Product color] red,grey,natural,white,black or any other required color

[Application] heat transfer print equipment,electronics and electrics,machine and seal[Character]high temperature resistant, aging resistant, ozone resistant, insulation property, fuel oil
resistance, lubes resistance, no smell and wear well, good acoustic and thermal insulation properties.


■ Technical Index:
style: open cell
surface:Double Fabric Impression
Tear strength:55Kn/m
Press strength:30Mpa
elongation:100%
hardness:8-50 Shore A
Temperature range:-50-220C continuously; -70℃ ~ +260℃ for intermittent use
density:0.55-0.9g/cm3
Flame resistance:94V-0
Dielectric breakdown voltage:>3KV
Dielectric constant:5.5 KHz
Tensile strength: 10-30psi
Volume resistance:1.*1011 Ohm-m
Thermal conductivity:0.1 W/M-K
Thick tolerance: ±0.05mm~0.1mm