GSM Alarm System
GSM Alarm SystemItem Code / Model Number:
GSM Alarm System
GSM Alarm System
WT 1010SA is the GSM Alarm System can be deployed in places where no telecom line. Suitable for garage, store, house, warehouse, shop and other places where there is no phone line on the premises or a phone line point is not close to the building. The alarm system uses a GSM communicator, no distance limits to receive alarms calls or for dialing out to control the alarm system
Features
1. Four Alarm Input. The system have the function to sent SMS and call to the user in the even if input triggered. For example Zone 4 connected to an electrical door, when there is intruder or electrical door is open illegally, the WT 1010SA will receive short circuit impulse on Zone 4 and automatically sent a signal to the pre-set number and notify the owner
2. Alarm zoning can be edited and programmed upto 50 characters long.You can use this function to program any languages. You can change the displayed text by sending a command by SMS to the unit. For example, Change the Zone 4 to “DOOR OPEN”
3. This is possible to arm/disarm the unit remotely via SMS or phone call. Alternatively, it also can connect to the basic telephone to perform arm/disarm. 2 units of remote control also will provide.
4. Three remote control output. These open collector outputs (that can sink max 300mA per output) can be turned on and off remotely though a SMS or phone call. Remote control will be reachable by sending a SMS or phone call with a command. For example SMS/Call in to switch on lighting, air conditional, generator, sensor or other equipment.
5. Automatically call to 8 pre program phone numbers while alarming. The WT 1010 also will SMS to 8 programmable phone numbers to notify the user if any intruder.
6. Most of the countries, GSM Mobile Operator offer cheaper call plan compared to telecom landline. It can connect to the basic telephone to make call and if any intruder, the WT1010SA will cut the telephone call and sent out the alarm messages first.
7. The owner will automatically received the SMS text messages for “battery Fail”, “telecom Line Fail” , “AC Fail”, “INPUT 1 – INPUT 4 Fail”, “GSM Alive” if any of the above having problem.
8. Standby rechargeable battery to prevent power failure or electricity cut off by intruder. The GSM will function as normal when no electricity supply.
WT 1010SA is the GSM Alarm System can be deployed in places where no telecom line. Suitable for garage, store, house, warehouse, shop and other places where there is no phone line on the premises or a phone line point is not close to the building. The alarm system uses a GSM communicator, no distance limits to receive alarms calls or for dialing out to control the alarm system
Features
1. Four Alarm Input. The system have the function to sent SMS and call to the user in the even if input triggered. For example Zone 4 connected to an electrical door, when there is intruder or electrical door is open illegally, the WT 1010SA will receive short circuit impulse on Zone 4 and automatically sent a signal to the pre-set number and notify the owner
2. Alarm zoning can be edited and programmed upto 50 characters long.You can use this function to program any languages. You can change the displayed text by sending a command by SMS to the unit. For example, Change the Zone 4 to “DOOR OPEN”
3. This is possible to arm/disarm the unit remotely via SMS or phone call. Alternatively, it also can connect to the basic telephone to perform arm/disarm. 2 units of remote control also will provide.
4. Three remote control output. These open collector outputs (that can sink max 300mA per output) can be turned on and off remotely though a SMS or phone call. Remote control will be reachable by sending a SMS or phone call with a command. For example SMS/Call in to switch on lighting, air conditional, generator, sensor or other equipment.
5. Automatically call to 8 pre program phone numbers while alarming. The WT 1010 also will SMS to 8 programmable phone numbers to notify the user if any intruder.
6. Most of the countries, GSM Mobile Operator offer cheaper call plan compared to telecom landline. It can connect to the basic telephone to make call and if any intruder, the WT1010SA will cut the telephone call and sent out the alarm messages first.
7. The owner will automatically received the SMS text messages for “battery Fail”, “telecom Line Fail” , “AC Fail”, “INPUT 1 – INPUT 4 Fail”, “GSM Alive” if any of the above having problem.
8. Standby rechargeable battery to prevent power failure or electricity cut off by intruder. The GSM will function as normal when no electricity supply.
- Keywords:
- gsm, alarm, security