Pvc Vacuum Suck Plastic Glue

1 Name: PVC vacuum suck plastic glue
Product type:XS108
2 Application Range
PVC and MDF, particleboard adhesion(also suitable for high light leather, PET leather)
General used for door, speaker etc. high requirement products

3 Product features
1) Strong sticky strength
2) good spray craft
3) good weather-resistance after cohere
4) The addition of curing agent will be better performance.


4 Technical Index
Appearance ivory liquid
PH 6.0-9.0
Viscosity mpas 25℃ ≥500
Packing specification 20kg/barrel


5 Method of Use
1) Coating method, spraying or manual brush
2) The water percentage of sticky MDF should lower than 18%
3) The operation environment temperature as far as possible in the range of 15-25℃
4) Glue brushing volume:60-200g/square meter
5) Vacuum suck time: 120-200 seconds
6) Hot activation temperature( glue lay): not below 55℃
7) Cleaning: before the drying of test glue can be cleaned by water.


6 Note
1) Do not mix with the glue of other brand;
2) The surface of the base material must be cleaned;
3) Customers can use it according to the actual conditions. The advice is just for reference only without responsibility;
4) Storage: the period is 6 months at 10-25℃( containers must be covered tightly).