Wood Bar Charcoal Making Machine

Introduction of Charcoal Briquette Machine:

Raw material: wood,branches,sawdust,straw,peanut hull,corncob,boll hull,sunflower hull,coconut shell,etc.

Moisture of raw material: around 12%.

product shape: long bars in square shape or with hexagonal shape.

Charcoal briquette(semifinished product) moisture: 2.1%

Charcoal briquette(semifinished product) density: 1.2-1.5g/cm3

Charcoal briquette (semifinished product) heat value: 19.79MJ

Dimension : 1350*850*630mm(L*W*H)



Charcoal Briquette Machine profile:

Charcoal machine is the device for the raw material such as wood,sawdust,peanut shells,corn,sugarcane bagasse, cotton stalk, corn stalk, rice husk, sawdust , miscellaneous branches and so on cruse into the granular within 10mm by crusher. the moisture content of less than 12% after drying, enter the bar make shape by the high temperature high pressure(do not add any additives),into the carbonization furnace(self built kiln) to carbonization,is the finished product charcoal. The charcoal machine production charcoal of high density, small volume, good flammability, would alternative to firewood and coal. The product general diameter is 50-60mm, aperture is 15-20mm, is hollow four or six corner column. The product is especially suitable for northern area heating in winter, greenhouse warming or ordinary life fuel. the full set of equipment of charcoal machine includes rod making machine, charring furnace, drying machines and other equipment.

Charcoal Briquette Machine Specification:

Model I II III
Capacity 120-180kg/h 180-240kg/h 240-320kg/h
Power 11+4.5kw 18.5+4.5kw 22+4.5kw
Diameter offinished
product 40,50,55mm 60,70,80mm 80mm
Shape of finished
product hexagonal, square and round
Raw materials Water(8-12%),diameter(3-5mm)