Dy-maam Driving Type Air Spray Cold Paint Road Marking Machine

Before thepavement marking constructio, storage drums and the making bucket must be preheated, maintain a constant temperature. Thermal preheater melted road marking paint, filling to use barbed wire marking machine storage tank before filtration. When coating poor flowability, it is necessary to adjust the heat plus. Otherwise, the coating film is not smooth, and the binding force of the ground is not good. Normal construction temperature of about 180 to 190 degrees Celsius. If you are using a hand push road marking machine, you need two manipulators, a primary operating push riders; another is to assist with the riders. Master manipulator is responsible for the cart traveling marking, auxiliary with riders responsible for the observed coating molded state, appropriate adjustments to the heating flame of the storage tank and the hopper to control the temperature of the coating, about the size of the amount of glass bead dispenser. At the same time, and stands ready to assist the master manipulator, and disposal of an emergency. Marking machine walking process, to ensure uniform, smooth. Too fast will cause Marking film thinning; marking flowing too slow will cause the destruction linear.