Working Shoe, Pu Sole, Insole Foaming Equipment

Category Main technical parameters Describe
Triple-componente Foaming Machine Equipment Model LZ-XC905 triple-components foaming machine
Power supply All power of the machine 12KW、4*380V/60HZ
The type of applicable foam Sole，insole， walking shoe, etc.
Flux of inject 30g-100g/S (Attention：the flux could be configured)
The press of infect 0.1MPA-3.99MPA
The mix proportion 100-65；100-110
Viscosity(22°) POLY( polyethylene )500-2000MPAS
Viscosity(22°) ISO( Multi-isocyanate )500-2000MPAS
Time of injecting 0.01-9.99/S( precision 0.01S)
Precision of injection 0.1/100
Process of injecting Manual inject by PLC programmed
Pneumatic pressure 0.6-0.8MPa
Area Wide:2.1M; High:2.35M; Long:3.5M
Weight of the machine 1．5ton
Pouring nozzle With collision impact needle, Never wear, Never plug

PLC Programmed computer（English demonstration）
It could control 100 patterns’ capacity of injecting at the same time and could wash the Gas-injecting automatically
heat system
It can automatic control temperature
Annular Workbench+ Mould Heating System
Pneumatic mold station 24
Material for work station 3mm, iron plate
Water heating box 150L,304 stainless steel
Water recycling tube With connectors
Water recycling tube 18kw
Oven Capacity 18kg=60 barrels Or 250kg=4 barrels
Gross power 6 kw