Periodontal Pockets

Medical device: CHEESE 4W 980nm (output power 2w-3.5w,CW )
Accessories:200um bare fiber,dental surgery handpiece with tips
Operation procedure: (decontamination procedure and therapy treatment)
While the lasing time is different, the laser motion used for both the decontamination procedure and laser therapy is exactly the same. And we penetrate to the depth of the pocket for both procedures.
For the decontamination procedure, the goal is to reduce the number of bacteria in the pocket around every tooth in the mouth to avoid bacteremia during the cleaning phase.So it will take 5-8 minutes to decontaminate the pocket space of 28 teeth,depending on pocket depth.
For the perio therapy treatment phase, of course,the goal is to eliminate the diseased tissue in the sulcus of all of the teeth in the quadrant being treated.It spends approximately 30-60s per tooth,again depending on the depth of the pocket and the severity of the inflammation present. This procedure adds about 5-7 minutes to the periodontal therapy appointment.
Hold the dental handpiece with a pen-like grasp,and keep high-speed suction next to the fiber while the laser power is on.Starting with the lowest power setting for the procedure that you are performing.
5.Placing the laser fiber into the gingival pocket,aiming the fiber toward the tissue.Adjusting the power setting to the degree of inflammation as you work.(less power for less inflammation;more power as needed).
6.Using 2*2 gauze to clean the fiber tip each time you come out of the pocket.